Arduino-en Archieven - Jantec.nl https://jantecnl.synology.me/en/category/arduino-en/ 3D modeling, scanning and printing Sat, 01 Mar 2025 10:35:27 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://jantecnl.synology.me/wp-content/uploads/2026/03/cropped-pagina01d-32x32.jpg Arduino-en Archieven - Jantec.nl https://jantecnl.synology.me/en/category/arduino-en/ 32 32 Free STL download 2-part case for SEEED XIAO nano SAMD or RP2040 https://jantecnl.synology.me/en/free-stl-download-2-part-case-for-seeed-xiao-nano-samd-or-rp2040/ Fri, 29 Nov 2024 16:00:08 +0000 https://jantecnl.synology.me/?p=16423 This is a tiny case for my XMAS LED projects, with RGB leds WS2811 or 2812B. Please donate $1 to my paypal account if you use (parts of) my designs so I can continue to share nice stuff for you to download download STL file small case Xiao nano&LDR&DS3231 with LDR hole 20241127 V14 Please …

Continue reading "Free STL download 2-part case for SEEED XIAO nano SAMD or RP2040"

Het bericht Free STL download 2-part case for SEEED XIAO nano SAMD or RP2040 verscheen eerst op Jantec.nl.

]]> free download of a cable connectorbox for 3mm 3-wire RGB LED cable/connectors https://jantecnl.synology.me/en/free-download-of-a-cable-connectorbox-for-3mm-3-wire-rgb-led-cable-connectors/ Fri, 29 Nov 2024 12:44:59 +0000 https://jantecnl.synology.me/?p=16933 Please donate $1 to my paypal account if you use (parts of) my designs so I can continue to do this download STL file cableconnectorbox_30x14x14mmbox_3mmcable_V3_20241129          

Het bericht free download of a cable connectorbox for 3mm 3-wire RGB LED cable/connectors verscheen eerst op Jantec.nl.

]]> GRA-AFCH NixieClockShield_NCS318_V1_94_TZ.ino with Time zone and automated summer/winter time with example video https://jantecnl.synology.me/en/gra-afch-nixieclockshield_ncs318_v1_94_tz-ino-with-time-zone-and-automated-summer-winter-time-with-example-video/ Tue, 04 Apr 2023 17:37:01 +0000 https://jantecnl.synology.me/?p=13123 I added the timezone.lib plus arduino-additional code to the open-source code as GRA-AFCH made this for their  IN-18 nixie clock with Arduino Mega : NixieClockShield_NCS318_V1_94_TZ. This is a first version that works, but it might require some coding to be done, depending on where you live. And THIS is HOW it works:  The startup sequence …

Continue reading "GRA-AFCH NixieClockShield_NCS318_V1_94_TZ.ino with Time zone and automated summer/winter time with example video"

Het bericht GRA-AFCH NixieClockShield_NCS318_V1_94_TZ.ino with Time zone and automated summer/winter time with example video verscheen eerst op Jantec.nl.

]]> Super large LED clock with WS2812 LEDS and Arduino nano+3231 clock module https://jantecnl.synology.me/en/super-large-led-clock-with-ws2812-leds-and-arduino-nano3231-clock-module/ Sat, 11 Mar 2023 19:31:48 +0000 https://jantecnl.synology.me/?p=13422 FASTLED_clock_ALL_feed_V6_2023_01_22_FINAL_ONLY_CLOCK DOWNLOAD ARDUINO PROGRAM FILE

Het bericht Super large LED clock with WS2812 LEDS and Arduino nano+3231 clock module verscheen eerst op Jantec.nl.

]]> Xmas star door/ window hanger Arduino nano and WS2812 LEDS with LDR https://jantecnl.synology.me/en/xmas-star-doorhanger-arduino-nano-and-ws2812-leds/ Sun, 27 Nov 2022 11:18:00 +0000 https://jangriffioen.com/?p=4245 The latest arduino code WITH LDR is HERE: The LDR is to be soldered between A0 and GND. The data output is D5 and this must be connected to Data-in of the WS2812 (B) string.  5V and GND goes to the power source, which is also connected to the Arduino Nano. The STL file for …

Continue reading "Xmas star door/ window hanger Arduino nano and WS2812 LEDS with LDR"

Het bericht Xmas star door/ window hanger Arduino nano and WS2812 LEDS with LDR verscheen eerst op Jantec.nl.

]]> Circular clock WS2812 & Arduino nano https://jantecnl.synology.me/en/clock-ws2812-circular/ Mon, 27 Jun 2022 08:45:45 +0000 https://jantecnl.synology.me/?p=2388 LEES DIT ARTIKEL IN HET NEDERLANDS In the above video you see all required parts for the elctronics.  An arduino Nano, a time module LS3231 with battery back-up and a 4-parts ring each with 15 WS2812 LED’s that provide a 160mm 60 LED units clock.  You can build it as an open built unit as …

Continue reading "Circular clock WS2812 & Arduino nano"

Het bericht Circular clock WS2812 & Arduino nano verscheen eerst op Jantec.nl.

]]> OpenCNC hardware driver board with 2x Arduino Mega mini controller and wifi controller box https://jantecnl.synology.me/en/opencnc-hardware-driver-board-with-2x-arduino-mega-mini/ Sun, 14 Nov 2021 13:50:28 +0000 https://jantecnl.synology.me/?p=9045 This is the link to the board, user manual et cetera by Timo Altholtmann. I bought 2 kits with all hardware for 2 driver boards and 2 wifi remote control units from Timo in November 2021. Will update here how this progresses, as I intend to use this on either one of my 2 CNC …

Continue reading "OpenCNC hardware driver board with 2x Arduino Mega mini controller and wifi controller box"

Het bericht OpenCNC hardware driver board with 2x Arduino Mega mini controller and wifi controller box verscheen eerst op Jantec.nl.

]]> OCTOWS2811, Teensy 1.4 & JINX 64×32 LED display https://jantecnl.synology.me/en/octows2811-teensy-1-4-jinx-64x32-led-display-2/ Sat, 11 Sep 2021 12:26:20 +0000 https://jantecnl.synology.me/?p=7790 Using an octoWS2811 is the easiest way to make a LED display as shown above. For this to work properly you will first need to flash a Teensy module with the correct ARDUINO program and .firmware from HERE: Arduino IDE – Microsoft Store-toepassingen Install Arduino including the Teensy libraries and then download the firmware (program …

Continue reading "OCTOWS2811, Teensy 1.4 & JINX 64×32 LED display"

Het bericht OCTOWS2811, Teensy 1.4 & JINX 64×32 LED display verscheen eerst op Jantec.nl.

]]> CNC pendant for Duet2wifi and Indymill https://jantecnl.synology.me/en/cnc-pendant-for-duet2wifi-and-indymill/ Fri, 02 Jul 2021 20:24:21 +0000 https://jangriffioen.com/?p=4058 On the Duet support site a very good description and software for rebuilding a Chinese CNC-pendant for the Duet2wifi is available. I used this description to program an arduino pro micro, and connect it to the pendant wired, place it inside the pendant and connected the pendant with 4 wires to the Duet.  This works …

Continue reading "CNC pendant for Duet2wifi and Indymill"

Het bericht CNC pendant for Duet2wifi and Indymill verscheen eerst op Jantec.nl.

]]> My mini shop https://jantecnl.synology.me/en/my-mini-shop/ Sun, 30 May 2021 14:05:56 +0000 https://jangriffioen.com/?p=3979 Het bericht My mini shop verscheen eerst op Jantec.nl.

]]>