IndyMill CNC-en Archieven - Jantecnl.synology.me https://jantecnl.synology.me/en/category/indymill-cnc-en/ 3D modeling, scanning and printing Sat, 15 Nov 2025 23:49:34 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://jantecnl.synology.me/wp-content/uploads/2026/09/cropped-RingJG8H20.5ID2mmT20251024V7-32x32.png IndyMill CNC-en Archieven - Jantecnl.synology.me https://jantecnl.synology.me/en/category/indymill-cnc-en/ 32 32 CNC controller case free STL download Duet workbee Mellow FLY CDY with PSU, panic button, multiconnector and Fysetc Duepanel 7 inch https://jantecnl.synology.me/en/cnc-controller-case-free-stl-download-duet-workbee-mellow-fly-cdy-with-psu-panic-button-multiconnector-and-fysetc-duepanel-7-inch/ Sun, 02 Nov 2025 07:37:57 +0000 https://jantecnl.synology.me/?p=17062 DOWNLOAD CNC_controller_box_6_parts_V2_C)JANTEC.NL_20251102 Please donate $1 to my paypal account if you use my original designs  -) THE CNC CONTROL BOX Download the CNC controller box design file via the above link in 1 piece which will take around a day or more to print. The CNC box design is available in 6 separate design STL parts …

Continue reading "CNC controller case free STL download Duet workbee Mellow FLY CDY with PSU, panic button, multiconnector and Fysetc Duepanel 7 inch"

Het bericht CNC controller case free STL download Duet workbee Mellow FLY CDY with PSU, panic button, multiconnector and Fysetc Duepanel 7 inch verscheen eerst op Jantecnl.synology.me.

]]> Indymill CNC Controller -tests and the final choice- and WHY https://jantecnl.synology.me/en/indymill-cnc-controller/ Wed, 25 May 2022 18:53:54 +0000 https://jangriffioen.com/?p=3888 To get the best possible CNC driver / firmware setup, in combination with the CAD and CAM programs that are required, I tested the following setups with the Indymill hardware: I have a setup running on the CMC Indymill with Duet wifi BUT I just can’t get enough current to my Nema23 stepper motors. Therefore, …

Continue reading "Indymill CNC Controller -tests and the final choice- and WHY"

Het bericht Indymill CNC Controller -tests and the final choice- and WHY verscheen eerst op Jantecnl.synology.me.

]]> Cabling the Indymill CNC https://jantecnl.synology.me/en/cabling-the-indymill-cnc/ Thu, 15 Jul 2021 15:40:33 +0000 https://jangriffioen.com/?p=4150 Het bericht Cabling the Indymill CNC verscheen eerst op Jantecnl.synology.me.

]]> Indymill CNC with GRBL Mega256 RAMPS1.4 shield and LCD https://jantecnl.synology.me/en/indymill-cnc-with-grbl-mega256-ramps1-4-shield-and-lcd/ Wed, 07 Jul 2021 08:41:41 +0000 https://jangriffioen.com/?p=4125 This is my test setup for a 1.4 RAMPS shield on top of an Arduino Mega with TMC2209 drivers, optical endstops and individually homing of dual Yaxes PLUS an LCD that shows the exact XYZ locations anytime. Firstly, I must admit that this option was initially NOT on my list bacause I felt this was …

Continue reading "Indymill CNC with GRBL Mega256 RAMPS1.4 shield and LCD"

Het bericht Indymill CNC with GRBL Mega256 RAMPS1.4 shield and LCD verscheen eerst op Jantecnl.synology.me.

]]> Indymill CNC Nema23 with sensorless homing on Mellow Fly-CDY2 https://jantecnl.synology.me/en/indymill-cnc-nema23-with-sensorless-homin-on-mellow-fly-cdy2g/ Wed, 07 Jul 2021 07:35:24 +0000 https://jangriffioen.com/?p=4098 After configuring the reprap Mellow FLY-CDY-V2 motherboard for CNC including the webinterface and installing Mellow’s TMC2209 driver units I got  sensorless homing setup for the Indymill. It took a lot of time to get it all tuned, as the 3 axes act entirely different due to their different inertia.  The weight that is carried is …

Continue reading "Indymill CNC Nema23 with sensorless homing on Mellow Fly-CDY2"

Het bericht Indymill CNC Nema23 with sensorless homing on Mellow Fly-CDY2 verscheen eerst op Jantecnl.synology.me.

]]> Reprap CNC with Mellow FLY-CDY-V2 – Duet2wifi clone https://jantecnl.synology.me/en/reprap-cnc-with-mellow-fly-cdy-v2-duet2wifi-clone/ Wed, 07 Jul 2021 06:46:47 +0000 https://jangriffioen.com/?p=4087 To get the Indymill running, at first I chose to use the Duet2wifi and reprap3 as base.  Since I am very familiar with Reprap and with the Duet, I want to try this anyway.  In the end, if it is all installed I need to have software to design and get a file with Gcode …

Continue reading "Reprap CNC with Mellow FLY-CDY-V2 – Duet2wifi clone"

Het bericht Reprap CNC with Mellow FLY-CDY-V2 – Duet2wifi clone verscheen eerst op Jantecnl.synology.me.

]]> CNC pendant for Duet2wifi and Indymill https://jantecnl.synology.me/en/cnc-pendant-for-duet2wifi-and-indymill/ Fri, 02 Jul 2021 20:24:21 +0000 https://jangriffioen.com/?p=4058 On the Duet support site a very good description and software for rebuilding a Chinese CNC-pendant for the Duet2wifi is available. I used this description to program an arduino pro micro, and connect it to the pendant wired, place it inside the pendant and connected the pendant with 4 wires to the Duet.  This works …

Continue reading "CNC pendant for Duet2wifi and Indymill"

Het bericht CNC pendant for Duet2wifi and Indymill verscheen eerst op Jantecnl.synology.me.

]]> Flightcase for the Indymill’s electronics https://jantecnl.synology.me/en/flightcase-for-the-indymills-electronics/ Sat, 26 Jun 2021 17:52:17 +0000 https://jangriffioen.com/?p=4037 Just ordered me a new case for the Indymill’s electronics from Thomann.de. The idea is to get everything mounted in the cases, and use the control case with the lid open.  The control case gets connected to the Indymill case with multicables and – connectors. When not used, the cables get disconnected from the Indymill …

Continue reading "Flightcase for the Indymill’s electronics"

Het bericht Flightcase for the Indymill’s electronics verscheen eerst op Jantecnl.synology.me.

]]> Flightcase for the Indymill https://jantecnl.synology.me/en/flightcase-for-the-indymill/ Sat, 26 Jun 2021 17:30:27 +0000 https://jangriffioen.com/?p=4031 This is only the lower part of the newly built flightcase for the Indymill.  It is 15cm high, 75 cm deep and 80 cm wide, all measured on the inside. The top of the case is 22 cm high on the inside and it will get perspex windows at the front and top.  Wheels will …

Continue reading "Flightcase for the Indymill"

Het bericht Flightcase for the Indymill verscheen eerst op Jantecnl.synology.me.

]]> Indymill Z-axis with adapted lead screw bearing https://jantecnl.synology.me/en/indymill-z-axis-with-adapted-lead-screw-bearing/ Tue, 25 May 2021 18:40:07 +0000 https://jangriffioen.com/?p=3876 The Indymill’s Z-axis uses a lead screw  by design , and not a ballscrew as I would like.  But- that will be changed later. For now, the lead screw solution will be OK because I will first build the Indymill machine and use the 500 Watt DC engine I already have for my CNC3018 setup. …

Continue reading "Indymill Z-axis with adapted lead screw bearing"

Het bericht Indymill Z-axis with adapted lead screw bearing verscheen eerst op Jantecnl.synology.me.

]]> Indymill adapted X-axis for more rigidity https://jantecnl.synology.me/en/indymill-adapted-x-axis-for-more-rigidity/ Sun, 23 May 2021 20:39:38 +0000 https://jangriffioen.com/?p=3856 2021-05-22 Under construction-still trying to find out how to do this. I intend to use the same method as with the Y-axes so drop the 3d printed parts as much as possible and re-use the available bearing blocks and nut holder. For the red nut holder I only need to make a flat extension plate …

Continue reading "Indymill adapted X-axis for more rigidity"

Het bericht Indymill adapted X-axis for more rigidity verscheen eerst op Jantecnl.synology.me.

]]> Indymill adapted frame and -Y-axes build instructions https://jantecnl.synology.me/en/indymill-adapted-frame-and-y-axes-build-instructions/ Sun, 23 May 2021 14:40:12 +0000 https://jangriffioen.com/?p=3839 In this post, you can see how I changed the original Indymill to more rigidity by using the original 1605 aluminium nut holders for the 1605 ball bearing screws of the Y axis, and how I made use of the BK12 and BF12 ball bearing blocks instead of the 3d printed parts like in the …

Continue reading "Indymill adapted frame and -Y-axes build instructions"

Het bericht Indymill adapted frame and -Y-axes build instructions verscheen eerst op Jantecnl.synology.me.

]]> Milling the Indymill parts https://jantecnl.synology.me/en/milling-the-indymill-parts/ Sun, 23 May 2021 11:54:31 +0000 https://jangriffioen.com/?p=3827 Het bericht Milling the Indymill parts verscheen eerst op Jantecnl.synology.me.

]]> Indymill iron hardware treatment https://jantecnl.synology.me/en/indymill-iron-hardware-treatment/ Fri, 21 May 2021 14:10:55 +0000 https://jangriffioen.com/?p=3820 The required iron plates were not available in ready- to use state at the time I needed this, fortunately I could buy the plates as a kit with all of the drilled holes already in it, non-painted.  And- all of the thread tapping still needed to be done.   Since I am also making changes to …

Continue reading "Indymill iron hardware treatment"

Het bericht Indymill iron hardware treatment verscheen eerst op Jantecnl.synology.me.

]]> Indymill increased working space and stability Y-axis https://jantecnl.synology.me/en/indymill-increased-working-space-y-axis/ Thu, 13 May 2021 17:47:49 +0000 https://jangriffioen.com/?p=3770 2021 05 13: Yesterday I received the iron plates for my Indymill from Nikodem Bartnik, and it was all very well packed and quickly delivered! As I always do on any build, I first check the separated axis for best fit and possible improvements. I started with the Y-axis.  In the below picture, the left …

Continue reading "Indymill increased working space and stability Y-axis"

Het bericht Indymill increased working space and stability Y-axis verscheen eerst op Jantecnl.synology.me.

]]> IndyMill CNC machine https://jantecnl.synology.me/en/indymill-cnc-machine/ Sun, 02 May 2021 18:39:36 +0000 https://jangriffioen.com/?p=3102 Since Corona was still around (May, 2021) , I had some time available to spend on other things than just work. I already had an upgraded 3018 CNC-machine with a 0.5 kW spindle motor, and a simple GRBL 3- axis board that works very well.  But- it would be nice to make a CNC machine …

Continue reading "IndyMill CNC machine"

Het bericht IndyMill CNC machine verscheen eerst op Jantecnl.synology.me.

]]>