Jantec.nl

Citroën Traction Avant upgrade with a dual-diagonal separate braking system

J.M.W. Griffioen — Sat, 22 Aug 2026 08:13:23 +0000

From a safety standpoint, I’ve felt for some time now that my Traction Avant 11BN needs an upgrade to its braking system, which is originally equipped with a master cylinder with a single pressure chamber. I’d like to convert the system to a diagonally split braking system with a toothed master cylinder featuring two pressure …

Continue reading "Citroën Traction Avant upgrade with a dual-diagonal separate braking system"

Het bericht Citroën Traction Avant upgrade with a dual-diagonal separate braking system verscheen eerst op Jantec.nl.

Concert Ukelele cheap internet kit

J.M.W. Griffioen — Sat, 18 Jul 2026 08:20:51 +0000

This is a storyboard of me building a concert ukelele based on a complete building kit of parts, and how I did this. It may help you when you intend to go the same path. Got me a decent local concert-sized ukelele build kit and started with putting the neck on. I first lined …

Continue reading "Concert Ukelele cheap internet kit"

Het bericht Concert Ukelele cheap internet kit verscheen eerst op Jantec.nl.

Building a ministrat electric guitar

J.M.W. Griffioen — Tue, 09 Jun 2026 14:22:21 +0000

Why would you want to build a ministrat? Well, I wanted to have an electric guitar that I can take along easily when I travel. Plus, I want to use my leftovers from previous builds for this. So- I will re-use my ministar semi-acoustic precticing guitar’s neck and join it with a very lightweight basewood …

Continue reading "Building a ministrat electric guitar"

Het bericht Building a ministrat electric guitar verscheen eerst op Jantec.nl.

Adding AUX-INPUT to original ANKER Soundcore Motion Boom

J.M.W. Griffioen — Sun, 03 May 2026 09:12:47 +0000

The original version of the ANKER Soundcore Motion Boom only has bluetooth IN, and obviously this is not ideal when using it for an instrument input like guitar or keyboard. So- after some internet research, I did find a good video on how to take the motion boom apart and that’s what I did FIRST …

Continue reading "Adding AUX-INPUT to original ANKER Soundcore Motion Boom"

Het bericht Adding AUX-INPUT to original ANKER Soundcore Motion Boom verscheen eerst op Jantec.nl.

Wolfang GA200 action camera mini rig STL download

J.M.W. Griffioen — Wed, 18 Mar 2026 17:14:35 +0000

Wolfang_GA200_4k_videocam_smallrig_20260318_V11G_jantec.nl Please donate $1 to my paypal account if you use this original jantec.nl design -) Printed on Voron 600 @ 0.3 mm LH and 0,8mm nozzle, transparant PETG. Hispeed in 1 hour at 100% infill, front down, brim 0.2 mm thick, 10mm wide. Supports everywhere in matrix mode @ 10mm wide, big gap 0.5mm …

Continue reading "Wolfang GA200 action camera mini rig STL download"

Het bericht Wolfang GA200 action camera mini rig STL download verscheen eerst op Jantec.nl.

STL download acoustic guitar string tuners plastic pegs repair with 3d printed covers

J.M.W. Griffioen — Fri, 06 Mar 2026 07:29:53 +0000

One of my very old DIY elktro-acoustic guiters had broken tuners on it. I did not want to order me new ones, since the mechanics were Ok, it was just the plastic covers that were all more or less torn up. In Openscad, I designed the to be 3d-printed sleeves that fit around the metal …

Continue reading "STL download acoustic guitar string tuners plastic pegs repair with 3d printed covers"

Het bericht STL download acoustic guitar string tuners plastic pegs repair with 3d printed covers verscheen eerst op Jantec.nl.

M16 x 1.5 mm/thread male connection with hose barb free STL download

J.M.W. Griffioen — Thu, 12 Feb 2026 12:53:41 +0000

Made as mockup for old Peugeot J7/ 404 etc. and Citroën HY master brake cylinder, connects to a modern hose from a new type brake fluid’s supply reservoir. Printed in ABS, 100% infill. Put a rubber ring under the screw! I made this mockup to test if this all will fit in my Traction Avant …

Continue reading "M16 x 1.5 mm/thread male connection with hose barb free STL download"

Het bericht M16 x 1.5 mm/thread male connection with hose barb free STL download verscheen eerst op Jantec.nl.

My newly acquired Corghi A2001S tyre exchanger

J.M.W. Griffioen — Wed, 14 Jan 2026 07:29:10 +0000

Picked up yesterday (Monday, January 13, 2026) in Barneveld (The Netherlands, Europe): A well-used Corghi tire changer for the wheels and tires of classic cars. This machine can handle rims up to 18 inches in diameter, and with the extension pieces, up to 22 inches—more than enough for my needs. In addition, the vertical column …

Continue reading "My newly acquired Corghi A2001S tyre exchanger"

Het bericht My newly acquired Corghi A2001S tyre exchanger verscheen eerst op Jantec.nl.

Protected: Disc brakes for my Citroën Traction Avant

J.M.W. Griffioen — Sat, 10 Jan 2026 16:27:56 +0000

There is no excerpt because this is a protected post.

Het bericht Protected: Disc brakes for my Citroën Traction Avant verscheen eerst op Jantec.nl.

Traction Avant 11BN (1955) intital repairs in 2006 and following yearly maintenance scheme

J.M.W. Griffioen — Sat, 10 Jan 2026 10:51:52 +0000

I bought my Traction Avant 11BN (1955 made) in june 2006, and I had to perform a lot of mechanical repairs before the car was roadworthy. The engine block was cracked beyond repair, the gearbox 2nd gear was smashed, the brake system was really bad and so on. And the fenders were rotten in the …

Continue reading "Traction Avant 11BN (1955) intital repairs in 2006 and following yearly maintenance scheme"

Het bericht Traction Avant 11BN (1955) intital repairs in 2006 and following yearly maintenance scheme verscheen eerst op Jantec.nl.

free STL downloads in 7 parts for CNC controller box with mounts for Duet3-6HC, PSU, AC-inlet, multiconnector, emergency shut-off, LCD panel, homing buttons and DC outlet

J.M.W. Griffioen — Sun, 16 Nov 2025 08:09:03 +0000

CNC_ctrlbox_V21_DUET3_6HC_LCDPANEL_C)JANTEC.NL_20251115 CNC_ctrlbox_V21_DUET3_6HC_TOP_PART_C)JANTEC.NL_20251115 CNC_ctrlbox_V21_DUET3_6HC_REAR_PART_C)JANTEC.NL_20251115 CNC_ctrlbox_V21_DUET3_6HC_FRONT_PART_C)JANTEC.NL_20251115 CNC_ctrlbox_V21_DUET3_6HC_BOTTOM_PART_C)JANTEC.NL_20251115 CNC_ctrlbox_V21_DUET3_6HC_RIGHT_PART_C)JANTEC.NL_20251115 CNC_ctrlbox_V21_DUET3_6HC_LEFT_PART_C)JANTEC.NL_20251115 ALL IN ONE BOX as 1 STL FILE: CNC_ctrlbox_V21_DUET3_6HC_allinonebox_C)JANTEC.NL_20251115

Het bericht free STL downloads in 7 parts for CNC controller box with mounts for Duet3-6HC, PSU, AC-inlet, multiconnector, emergency shut-off, LCD panel, homing buttons and DC outlet verscheen eerst op Jantec.nl.

CNC controller case free STL download Duet workbee Mellow FLY CDY with PSU, panic button, multiconnector and Fysetc Duepanel 7 inch

J.M.W. Griffioen — Sun, 02 Nov 2025 07:37:57 +0000

DOWNLOAD CNC_controller_box_6_parts_V2_C)JANTEC.NL_20251102 Please donate $1 to my paypal account if you use my original designs -) THE CNC CONTROL BOX Download the CNC controller box design file via the above link in 1 piece which will take around a day or more to print. The CNC box design is available in 6 separate design STL parts …

Continue reading "CNC controller case free STL download Duet workbee Mellow FLY CDY with PSU, panic button, multiconnector and Fysetc Duepanel 7 inch"

Het bericht CNC controller case free STL download Duet workbee Mellow FLY CDY with PSU, panic button, multiconnector and Fysetc Duepanel 7 inch verscheen eerst op Jantec.nl.

STL download single- or dualcolor articulated egg cup

J.M.W. Griffioen — Sun, 19 Oct 2025 12:55:39 +0000

Please donate $1 to my paypal account if you use my original designs !

Het bericht STL download single- or dualcolor articulated egg cup verscheen eerst op Jantec.nl.

Mazda3 BK 2004 – Replacing Front Brakes: Calipers, Pads, Flexible Hoses and Rotors

J.M.W. Griffioen — Mon, 13 Oct 2025 10:34:28 +0000

About 2,500 km ago, we had the brake pads and rotors replaced on our 2004 Mazda 3. But lately, there’s been an occasional squeaking noise coming from the front end, especially when going through roundabouts. In my experience, this is usually caused by a stuck brake caliper. As a result, the brake pad cannot retract …

Continue reading "Mazda3 BK 2004 – Replacing Front Brakes: Calipers, Pads, Flexible Hoses and Rotors"

Het bericht Mazda3 BK 2004 – Replacing Front Brakes: Calipers, Pads, Flexible Hoses and Rotors verscheen eerst op Jantec.nl.

Download free vertical sun shade hood STL file for Tomtom Rider 410-550

J.M.W. Griffioen — Thu, 09 Oct 2025 11:17:41 +0000

I designed this in Openscad and it took 2 days (off and on) to get it perfect. I started with a horizontal sun shade I designed earlier. Please donate $1 to my paypal account if you use my original designs ! Tomtomrider550_sunshade_horizontal,_M_20251011V10 But I really needed a vertical one for usage on my motorbike. …

Continue reading "Download free vertical sun shade hood STL file for Tomtom Rider 410-550"

Het bericht Download free vertical sun shade hood STL file for Tomtom Rider 410-550 verscheen eerst op Jantec.nl.

ABS best speed- , fan- and temperature 3dprint settings

J.M.W. Griffioen — Sat, 13 Sep 2025 11:36:46 +0000

STANDARD ABS start settings Nozzle: 265 °C, Bed: 110 °C Object fan: 25% max from 5th layer, below this: 0% MY USAGE OF ABS I use almost only ABS for my professional prints with an 0.6 or 0.8 nozzle. That is because it is cheap, makes very sturdy prints and it can withstand pretty high …

Continue reading "ABS best speed- , fan- and temperature 3dprint settings"

Het bericht ABS best speed- , fan- and temperature 3dprint settings verscheen eerst op Jantec.nl.

Is E3D tool changer Z-homing with Voron TAP possible?

J.M.W. Griffioen — Thu, 11 Sep 2025 20:27:54 +0000

HOW DOES IT WORK WITH THE E3D TOOLCHANGER? The system whereby the E3D tool changer determines the Z value of the four tools is fixed in the preset system files. This means that you perform a Z homing paper test for each tool to determine the deviation of each tool relative to T0, which is …

Continue reading "Is E3D tool changer Z-homing with Voron TAP possible?"

Het bericht Is E3D tool changer Z-homing with Voron TAP possible? verscheen eerst op Jantec.nl.

garden wall with 3d printed hanging flower pots download free STL files

J.M.W. Griffioen — Sun, 24 Aug 2025 07:15:09 +0000

In my small garden, a wall from my neighbour’s house extension has always felt a sort of in my way. I thought a lot about making this wall a bit more visually attractive and I came up with this: I created a setup with impregnated wooden garden planks, which I splitted lenghtwise with my small …

Continue reading "garden wall with 3d printed hanging flower pots download free STL files"

Het bericht garden wall with 3d printed hanging flower pots download free STL files verscheen eerst op Jantec.nl.

FREE STL DOWNLOADS reducers, bends, offset pieces, mounting brackets and wall bushings for 55×110 mm air ducts

J.M.W. Griffioen — Fri, 15 Aug 2025 09:43:46 +0000

Het bericht FREE STL DOWNLOADS reducers, bends, offset pieces, mounting brackets and wall bushings for 55×110 mm air ducts verscheen eerst op Jantec.nl.

in-line 120mm fan adapter for 110×55 (OD) mm air ducts (wall-mounted)

J.M.W. Griffioen — Fri, 15 Aug 2025 06:47:46 +0000

FanAdapter_square_flanges_for_110x55_OD_pipes_with_banner_20250731V11 FanAdapter_square_flanges_for_110x55_pipes_LID_20250730V10b

Het bericht in-line 120mm fan adapter for 110×55 (OD) mm air ducts (wall-mounted) verscheen eerst op Jantec.nl.

CREALITY FALCON2 PRO 22W laser versus LASERTREE LT-K60 laser

J.M.W. Griffioen — Tue, 05 Aug 2025 11:48:54 +0000

The Creality Falcon pro 22Watt Laser unit is the standard delivery for the ‘entry’version of the Creality Falcon 2 pro enclosed laser engraver/cutter. The Lasertree LT-K60 laser is available as just the laser unit. READ THESE ARTICLES FOR AN IN-DEPTH REVIEW OF THE LT-K60 There’s a lot of similarities between both lasers, and quite a …

Continue reading "CREALITY FALCON2 PRO 22W laser versus LASERTREE LT-K60 laser"

Het bericht CREALITY FALCON2 PRO 22W laser versus LASERTREE LT-K60 laser verscheen eerst op Jantec.nl.

Laser cutter Creality Falcon 2 pro – installation

J.M.W. Griffioen — Thu, 24 Jul 2025 08:11:12 +0000

Finally I made the transition to a robust diode laser machine for my wood and acrylic cutting work. Until now, I have been using my K40 CO2 40 Watt laser cutter/engraver. I will continue to use the K40 machine for clear glass, as it cannot be cut/engraved with a diode laser. The Creality Falcon 2 …

Continue reading "Laser cutter Creality Falcon 2 pro – installation"

Het bericht Laser cutter Creality Falcon 2 pro – installation verscheen eerst op Jantec.nl.

User review BYD Atto3 from October 2022 driven during 2.5 years and 50.000 kilometers

J.M.W. Griffioen — Fri, 09 May 2025 09:05:21 +0000

Writing this on May 9th 2025 after almost 50.00 kilometers, I trust that this user review of my Atto3 may be useful to others. The car is now well over 2 1/2 years ‘old’ and has never had any defect, never got me stranded nor did I ever need any assistance to drive it. In …

Continue reading "User review BYD Atto3 from October 2022 driven during 2.5 years and 50.000 kilometers"

Het bericht User review BYD Atto3 from October 2022 driven during 2.5 years and 50.000 kilometers verscheen eerst op Jantec.nl.

Charging my EV across the sidewalk with a flat charging cable

J.M.W. Griffioen — Fri, 09 May 2025 08:46:47 +0000

Het bericht Charging my EV across the sidewalk with a flat charging cable verscheen eerst op Jantec.nl.

DIY STL lamp shade for tea light

J.M.W. Griffioen — Fri, 28 Feb 2025 09:55:44 +0000

DOWNLOAD THE HI_RES STL Please donate $1 to my paypal account if you use (parts of) my designs so I can continue to share nice stuff for you to download

Het bericht DIY STL lamp shade for tea light verscheen eerst op Jantec.nl.

CNC workbee control cabinet free OBJ and STL downloads with space for DUET3 6HC, power supply, panic button, 24-pin multi-connector and Fysetc 7-inch Duepanel touch-LCD

J.M.W. Griffioen — Sun, 09 Feb 2025 11:03:51 +0000

Due to the DUET3 control board’s size, it does not fit into the previously developed CNC housing for a FLY_CDY board, so a lot of modifications had to be made. This resulted in the preliminary (V13) OBJ design which can be downloaded HERE (20250604) This post has the published last version with tight fits for …

Continue reading "CNC workbee control cabinet free OBJ and STL downloads with space for DUET3 6HC, power supply, panic button, 24-pin multi-connector and Fysetc 7-inch Duepanel touch-LCD"

Het bericht CNC workbee control cabinet free OBJ and STL downloads with space for DUET3 6HC, power supply, panic button, 24-pin multi-connector and Fysetc 7-inch Duepanel touch-LCD verscheen eerst op Jantec.nl.

Review and teardown cheap small banggood windmill 6 blades 44 inch wing span

J.M.W. Griffioen — Fri, 10 Jan 2025 11:30:55 +0000

Some results of my research on this so-called 500 Watts 24Volt wind turbine: The span width is 44 inch, 110 cm. It is realistically not possible to generate more power than 80 Wattts at any given time, given the 44 inch span width. Unless you have turbo winds and position the wind mill at …

Continue reading "Review and teardown cheap small banggood windmill 6 blades 44 inch wing span"

Het bericht Review and teardown cheap small banggood windmill 6 blades 44 inch wing span verscheen eerst op Jantec.nl.

My 3D printers LIVE action

J.M.W. Griffioen — Thu, 12 Dec 2024 21:43:02 +0000

https://jantecnl.synology.me/wp-content/uploads/2023/12/Voron-2.4-600-2024.mp4 https://jantecnl.synology.me/wp-content/uploads/2024/12/twotrees.mp4 https://jantecnl.synology.me/wp-content/uploads/2023/12/Video-van-WhatsApp-op-2023-12-01-om-22.33.25_94d5cf53.mp4 https://jantecnl.synology.me/wp-content/uploads/2023/12/Video-van-WhatsApp-op-2023-12-01-om-22.33.31_b328ddd2.mp4 https://jantecnl.synology.me/wp-content/uploads/2023/12/Video-van-WhatsApp-op-2023-12-01-om-22.33.35_a7d8f942.mp4 https://jantecnl.synology.me/wp-content/uploads/2023/12/Video-van-WhatsApp-op-2023-12-01-om-22.33.41_cdf052a4.mp4 https://jantecnl.synology.me/wp-content/uploads/2023/12/Video-van-WhatsApp-op-2023-12-01-om-22.33.25_8c6e1b5c.mp4 https://jantecnl.synology.me/wp-content/uploads/2022/10/E3D-toolchanger-first-benchy-4-colors-Hymera-direct-drive.mp4

Het bericht My 3D printers LIVE action verscheen eerst op Jantec.nl.

Free STL download 2-part case for SEEED XIAO nano SAMD or RP2040

J.M.W. Griffioen — Fri, 29 Nov 2024 16:00:08 +0000

This is a tiny case for my XMAS LED projects, with RGB leds WS2811 or 2812B. Please donate $1 to my paypal account if you use (parts of) my designs so I can continue to share nice stuff for you to download download STL file small case Xiao nano&LDR&DS3231 with LDR hole 20241127 V14 Please …

Continue reading "Free STL download 2-part case for SEEED XIAO nano SAMD or RP2040"

Het bericht Free STL download 2-part case for SEEED XIAO nano SAMD or RP2040 verscheen eerst op Jantec.nl.

free download of a cable connectorbox for 3mm 3-wire RGB LED cable/connectors

J.M.W. Griffioen — Fri, 29 Nov 2024 12:44:59 +0000

Please donate $1 to my paypal account if you use (parts of) my designs so I can continue to do this download STL file cableconnectorbox_30x14x14mmbox_3mmcable_V3_20241129

Het bericht free download of a cable connectorbox for 3mm 3-wire RGB LED cable/connectors verscheen eerst op Jantec.nl.

Free download STL files multicolor gadget open hollow multicolor 3d printer designs

J.M.W. Griffioen — Fri, 02 Aug 2024 11:05:36 +0000

multicolor_open_elliptic_sheres_inner_hull_main_Jantec.nl_V5_20240731.STL multicolor_open_elliptic_sheres_inner_hull_sub_Jantec.nl_V5_20240731.STL multicolor_open_elliptic_sheres_mid_hull_main_Jantec.nl_V5_20240731.STL multicolor_open_elliptic_sheres_mid_hull_sub_Jantec.nl_V5_20240731.STL multicolor_open_elliptic_sheres_outer_hull_main_Jantec.nl_V5_20240731.STL multicolor_open_elliptic_sheres_outer_hull_sub_Jantec.nl_V5_20240731.STL CFFFP_multicolor_open_elliptic_sheres_mid_hull_sub_Jantec.nl_V5_20240731 .3MF (file voor (E3D) toolchanger met 4 x PLA en direct drive extruders) Please donate $1 to my paypal account for using any of my designs so I can continue to do this Import all 6 STL files into a slicer that is set for use with a …

Continue reading "Free download STL files multicolor gadget open hollow multicolor 3d printer designs"

Het bericht Free download STL files multicolor gadget open hollow multicolor 3d printer designs verscheen eerst op Jantec.nl.

Jantec.nl/en : Our English site is no longer fully mirrored to our original Dutch website as of July 1st, 2024

J.M.W. Griffioen — Sun, 30 Jun 2024 08:28:03 +0000

New posts and articles will first be made available on our Dutch site https/jantec.nl as of July 1st, 2024. We do try to translate as many posts as we can to English, but this is pretty time consuming, so some articles will likely be only available in Dutch. BUT we do have a translator module …

Continue reading "Jantec.nl/en : Our English site is no longer fully mirrored to our original Dutch website as of July 1st, 2024"

Het bericht Jantec.nl/en : Our English site is no longer fully mirrored to our original Dutch website as of July 1st, 2024 verscheen eerst op Jantec.nl.

Several STL design lampshades for 3d printer large socket E27 LED bulb

J.M.W. Griffioen — Sun, 23 Jun 2024 09:42:09 +0000

STL Download lamp_hood_12facets_whole_mini_dots_E27_20240621V13_PRUSA_MINI Please donate $1 to my paypal account if you use (parts of) my designs so I can continue to do this DOWNLOAD STL lamp_hood_all_versions_SMALL_shape96_round_pattern8_E27_20240622V15b2_PRUSA_MINI Please donate $1 to my paypal account if you use (parts of) my designs so I can continue to do this STL DOWNLOAD lamp_hood_all_versions_SMALL_round_E27_20240622V15b2_PRUSA_MINI Please …

Continue reading "Several STL design lampshades for 3d printer large socket E27 LED bulb"

Het bericht Several STL design lampshades for 3d printer large socket E27 LED bulb verscheen eerst op Jantec.nl.

STL Design lampshade large socket E27 for 3d printer

J.M.W. Griffioen — Sun, 23 Jun 2024 09:14:33 +0000

DOWNLOAD STL lamp_hood_oval_oval_holes_E27_20240621V14d_VORON_300 Please donate $1 to my paypal account if you use (parts of) my designs so I can continue to do this DOWNLOAD STL lamp_hood_oval_oval_holes_E27_20240621V14d_PRUSA_MINI Please donate $1 to my paypal account if you use (parts of) my designs so I can continue to do this https://jantecnl.synology.me/wp-content/uploads/2024/06/Video-van-WhatsApp-op-2024-06-24-om-12.15.39_e334626d.mp4

Het bericht STL Design lampshade large socket E27 for 3d printer verscheen eerst op Jantec.nl.

125 mm airco hose adapter STL printable file for standard 42x375mm window vents

J.M.W. Griffioen — Sun, 09 Jun 2024 09:02:30 +0000

air exhaust VERY SHORT 121mm round for window klein achter beneden 375x42mm ventilation sleeve angled 20240607V15b DOWNLOAD STL arco hose adapter 125mm for window klein 2nd_3rd floor 275x42mm sleeve screw_on 20240612V16cDOWNLOAD STL Video van WhatsApp op 2024-06-14 om 08.36.55_1fb3b4bf https://jantecnl.synology.me/wp-content/uploads/2024/06/Video-van-WhatsApp-op-2024-06-14-om-08.36.55_1fb3b4bf.mp4

Het bericht 125 mm airco hose adapter STL printable file for standard 42x375mm window vents verscheen eerst op Jantec.nl.

BYD Atto3 upgraded black C-pillar covers

J.M.W. Griffioen — Thu, 11 Apr 2024 08:21:38 +0000

My Atto3 originally had silver colored C-pillar covers. I ordered a set of black covers that can be mounted on top of the existing ones. The result is shown in the added pictures. Mounting these covers is very easy because along the inside’s edges a strip of 2-sided tape is plcaed. . Just remove the …

Continue reading "BYD Atto3 upgraded black C-pillar covers"

Het bericht BYD Atto3 upgraded black C-pillar covers verscheen eerst op Jantec.nl.

Replaced my softail’s rear shocks

J.M.W. Griffioen — Sat, 30 Mar 2024 09:35:11 +0000

I often drag my HD Heritage softail on roundabouts when I am not paying attention just with my left and right sides across the street. This can be solved by giving the bike a slightly higher position. To do this, you can lengthen the front fork slightly at the front and you can also raise …

Continue reading "Replaced my softail’s rear shocks"

Het bericht Replaced my softail’s rear shocks verscheen eerst op Jantec.nl.

Harley Davidson Heritage lifted front fork 2 inch overstock

J.M.W. Griffioen — Mon, 25 Mar 2024 09:17:08 +0000

First, the light housing/ shroud’s rear parts are removed, the brake line to the front caliper loosened and the headlight’s internal unit has been removed. Then, the top BIG screws can be removed from the front fork units. For this, I used my large socket wrench kit: Then, I loosened the 2 bolts that clamp …

Continue reading "Harley Davidson Heritage lifted front fork 2 inch overstock"

Het bericht Harley Davidson Heritage lifted front fork 2 inch overstock verscheen eerst op Jantec.nl.

Replacing the heater mosfet B6066 of a Mellow Fly SB2040 pro plus Canbus 3d printer’s Voron Stealthburner toolhead PCB

J.M.W. Griffioen — Sat, 16 Mar 2024 13:46:59 +0000

Due to my careless behaviour I damaged the hotend’s heater Mosfet of my Voron 2.4’s Stealthburner toolhead’s PCB. This toolhead PCB is a Mellow Fly SB2040 Pro plus. It has an accelerometer, a 2240 TMC, and it works with PT100 for the heater. It works very well through Canbus and my installed PICAN USB-interface on …

Continue reading "Replacing the heater mosfet B6066 of a Mellow Fly SB2040 pro plus Canbus 3d printer’s Voron Stealthburner toolhead PCB"

Het bericht Replacing the heater mosfet B6066 of a Mellow Fly SB2040 pro plus Canbus 3d printer’s Voron Stealthburner toolhead PCB verscheen eerst op Jantec.nl.

mysterious anonymous art placement in Amsterdam, Europe

J.M.W. Griffioen — Sun, 10 Mar 2024 12:30:21 +0000

https://www.washingtonpost.com/travel/2023/01/20/amsterdam-free-art-unknown-sculptor/ The mysterious art of Amsterdam’s ‘Unknown Sculptor’ The city of Amsterdam, Europe manages the works of an anonymous doctor. Here are 6 places to see it. By Noëlle de Leeuw January 20, 2023 at 8:00 a.m. EST In the heart of the Red Light District, tucked away between the cobblestones, lies the mysteriously placed bronze …

Continue reading "mysterious anonymous art placement in Amsterdam, Europe"

Het bericht mysterious anonymous art placement in Amsterdam, Europe verscheen eerst op Jantec.nl.

Switched to a Chinese high-flow CHT nozzle – Now, what is wrong with this ABS printed test cube?

J.M.W. Griffioen — Tue, 27 Feb 2024 15:19:54 +0000

So- what do you think is wrong with this ABS printed testcube after my switch from a standard 0.5 mm nozzle to an 0.6mm Chinese CHT high-flow nozzle? I did not change anything other than the Curaslicer settings from 0.5mm to 0.6mm and also in Klipper, in the printer.cfg I also changed the setting from …

Continue reading "Switched to a Chinese high-flow CHT nozzle – Now, what is wrong with this ABS printed test cube?"

Het bericht Switched to a Chinese high-flow CHT nozzle – Now, what is wrong with this ABS printed test cube? verscheen eerst op Jantec.nl.

Heated bed alternative fixture for Voron 2.4 3d printer

J.M.W. Griffioen — Wed, 21 Feb 2024 23:25:50 +0000

To mount my Voren 2.4 R2 600x600mm heated bed solidly on the 3 pieces of 2020 aluminium rails, I used an alternative way, instead of the ,ethod that is usually done. The reason is that I am using TAP as Z-probe and I want the bed to be mounted as sturdy as possible. To do …

Continue reading "Heated bed alternative fixture for Voron 2.4 3d printer"

Het bericht Heated bed alternative fixture for Voron 2.4 3d printer verscheen eerst op Jantec.nl.

Commisioning my VORON2.4 600 3d printer with OCTOPRINT, KLIPPER, CANBUS FLY SB2040 PROplus toolhead module + KNOMI V2, OCTOPUS Pro F429 motherboard and PICAN module

J.M.W. Griffioen — Sat, 17 Feb 2024 11:56:37 +0000

Before building my 600x600x500 (XYZ) Voron 2.4 3d printer, I decided which electronics I would use. The choice for the electronics’ hard- and firmware was the following: Raspberry PI4B 2GB with Octoprint, Klipper Octopus pro 1.01 F429 1MB motherboard with KLIPPER firmware PICAN CANBUS adapter USB-CANBUS with Candlelight firmware Mellow/Fly SB2040 PROplus CANBUS module for …

Continue reading "Commisioning my VORON2.4 600 3d printer with OCTOPRINT, KLIPPER, CANBUS FLY SB2040 PROplus toolhead module + KNOMI V2, OCTOPUS Pro F429 motherboard and PICAN module"

Het bericht Commisioning my VORON2.4 600 3d printer with OCTOPRINT, KLIPPER, CANBUS FLY SB2040 PROplus toolhead module + KNOMI V2, OCTOPUS Pro F429 motherboard and PICAN module verscheen eerst op Jantec.nl.

Pocket watch ‘Cylindre 10 rubis’

J.M.W. Griffioen — Wed, 03 Jan 2024 07:20:54 +0000

Pocket watch ‘Cylindre 10 rubis’ I bought this watch on eBay, state to be a pre-WW2 pocket watch. It does not run and the main spring appears broken. But- it is in a repairable state and everything moves easily. Most importantly- it has not been tampered with. In my search for similar watches i …

Continue reading "Pocket watch ‘Cylindre 10 rubis’"

Het bericht Pocket watch ‘Cylindre 10 rubis’ verscheen eerst op Jantec.nl.

Building a BIG Voron 2.4 R2 CANBUS 600mm 3d printer

J.M.W. Griffioen — Mon, 25 Dec 2023 17:18:42 +0000

The firmware and configs of this build is described HERE For a specific printjob, I really need a large 3d printer. The largest printsize I had before building this big Voron 2.4R2 printer is my 330x330x400mm A30M. https://jantecnl.synology.me/wp-content/uploads/2023/12/Video-van-WhatsApp-op-2023-10-26-om-09.49.40_45a7f208.mp4 But that only does PLA since it does not have an enclosure and the bed is not …

Continue reading "Building a BIG Voron 2.4 R2 CANBUS 600mm 3d printer"

Het bericht Building a BIG Voron 2.4 R2 CANBUS 600mm 3d printer verscheen eerst op Jantec.nl.

Chevrolet Camaro 1970 3D armrest reproduction

J.M.W. Griffioen — Fri, 08 Dec 2023 16:06:17 +0000

If you are interested in purchasing these original jantec.nl designs, please email us at info@jantec.nl! My brother owns a completely overhauled Chevrolet Camaro with power windows (I believe from 1969 or 1971) and asked if I could scan, improve and reproduce the armrests since these are both quite sloppy. This type of Chevrolet Camaro is …

Continue reading "Chevrolet Camaro 1970 3D armrest reproduction"

Het bericht Chevrolet Camaro 1970 3D armrest reproduction verscheen eerst op Jantec.nl.

STL design for 4 segments 60-led Arduino clock mounting

J.M.W. Griffioen — Sun, 19 Nov 2023 14:07:59 +0000

CLOCK_DOWNLOAD STL_case_for-4 parts_2812_rear_and_desk_stand_V3_2023_11_19

Het bericht STL design for 4 segments 60-led Arduino clock mounting verscheen eerst op Jantec.nl.

Voron 2.4 exhaust adapter from fan 60mm 45 degrees to 40mm pipe STL printable design

J.M.W. Griffioen — Sat, 18 Nov 2023 15:08:23 +0000

Voron2.4_fanduct_60_flanged_to_2x_40_inner_bent_pipes_45&180deg_V6_20231118 DOWNLOAD STL Voron 2.4 Core XY build

Het bericht Voron 2.4 exhaust adapter from fan 60mm 45 degrees to 40mm pipe STL printable design verscheen eerst op Jantec.nl.

BYD Atto 3: User experiences after 9 months and 10,000 miles

J.M.W. Griffioen — Thu, 21 Sep 2023 11:54:27 +0000

This review replaces my previous reviews of my Atto 3, as all of my desired software enhancements have been completed filled in by BYD. Meanwhile, software version 1.4 was loaded into the car via OTA on 18-9-2023 and as far as I am concerned, the car is completely OK in terms of software. This is …

Continue reading "BYD Atto 3: User experiences after 9 months and 10,000 miles"

Het bericht BYD Atto 3: User experiences after 9 months and 10,000 miles verscheen eerst op Jantec.nl.

BYD Atto 3: Mounting an original BYD dashcam DIY

J.M.W. Griffioen — Tue, 19 Sep 2023 08:34:31 +0000

I have driven my BYD Atto 3 from its purchase in November 2022 with a Garmin mini dashcam mounted in it, on the windshield just above right next to the interior mirror. That works fine, except you have a cable running that you have to get rid of and you have to use your phone …

Continue reading "BYD Atto 3: Mounting an original BYD dashcam DIY"

Het bericht BYD Atto 3: Mounting an original BYD dashcam DIY verscheen eerst op Jantec.nl.