CNC-en Archieven - Jantec.nl https://jantecnl.synology.me/en/category/cnc-en/ 3D modeling, scanning and printing Sun, 16 Nov 2025 08:50:23 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://jantecnl.synology.me/wp-content/uploads/2026/03/cropped-pagina01d-32x32.jpg CNC-en Archieven - Jantec.nl https://jantecnl.synology.me/en/category/cnc-en/ 32 32 free STL downloads in 7 parts for CNC controller box with mounts for Duet3-6HC, PSU, AC-inlet, multiconnector, emergency shut-off, LCD panel, homing buttons and DC outlet https://jantecnl.synology.me/en/free-stl-downloads-in-7-parts-for-cnc-controller-box-with-mounts-for-duet3-6hc-psu-ac-inlet-multiconnector-emergency-shut-off-lcd-panel-homing-buttons-and-dc-outlet/ Sun, 16 Nov 2025 08:09:03 +0000 https://jantecnl.synology.me/?p=17974 CNC_ctrlbox_V21_DUET3_6HC_LCDPANEL_C)JANTEC.NL_20251115 CNC_ctrlbox_V21_DUET3_6HC_TOP_PART_C)JANTEC.NL_20251115   CNC_ctrlbox_V21_DUET3_6HC_REAR_PART_C)JANTEC.NL_20251115   CNC_ctrlbox_V21_DUET3_6HC_FRONT_PART_C)JANTEC.NL_20251115   CNC_ctrlbox_V21_DUET3_6HC_BOTTOM_PART_C)JANTEC.NL_20251115   CNC_ctrlbox_V21_DUET3_6HC_RIGHT_PART_C)JANTEC.NL_20251115   CNC_ctrlbox_V21_DUET3_6HC_LEFT_PART_C)JANTEC.NL_20251115 ALL IN ONE BOX as 1 STL FILE: CNC_ctrlbox_V21_DUET3_6HC_allinonebox_C)JANTEC.NL_20251115    

Het bericht free STL downloads in 7 parts for CNC controller box with mounts for Duet3-6HC, PSU, AC-inlet, multiconnector, emergency shut-off, LCD panel, homing buttons and DC outlet verscheen eerst op Jantec.nl.

]]> CNC controller case free STL download Duet workbee Mellow FLY CDY with PSU, panic button, multiconnector and Fysetc Duepanel 7 inch https://jantecnl.synology.me/en/cnc-controller-case-free-stl-download-duet-workbee-mellow-fly-cdy-with-psu-panic-button-multiconnector-and-fysetc-duepanel-7-inch/ Sun, 02 Nov 2025 07:37:57 +0000 https://jantecnl.synology.me/?p=17062 DOWNLOAD CNC_controller_box_6_parts_V2_C)JANTEC.NL_20251102 Please donate $1 to my paypal account if you use my original designs  -) THE CNC CONTROL BOX Download the CNC controller box design file via the above link in 1 piece which will take around a day or more to print. The CNC box design is available in 6 separate design STL parts …

Continue reading "CNC controller case free STL download Duet workbee Mellow FLY CDY with PSU, panic button, multiconnector and Fysetc Duepanel 7 inch"

Het bericht CNC controller case free STL download Duet workbee Mellow FLY CDY with PSU, panic button, multiconnector and Fysetc Duepanel 7 inch verscheen eerst op Jantec.nl.

]]> CNC workbee control cabinet free OBJ and STL downloads with space for DUET3 6HC, power supply, panic button, 24-pin multi-connector and Fysetc 7-inch Duepanel touch-LCD https://jantecnl.synology.me/en/cnc-workbee-control-cabinet-free-obj-download-with-space-for-duet3-6hc-power-supply-panic-button-24-pin-multi-connector-and-fysetc-7-inch-duepanel-touch-lcd/ Sun, 09 Feb 2025 11:03:51 +0000 https://jantecnl.synology.me/?p=17143 Due to the DUET3 control board’s size, it does not fit into the previously developed CNC housing for a FLY_CDY board, so a lot of modifications had to be made.  This resulted in the preliminary (V13) OBJ design which can be downloaded HERE (20250604) This post has the published  last version with tight fits for …

Continue reading "CNC workbee control cabinet free OBJ and STL downloads with space for DUET3 6HC, power supply, panic button, 24-pin multi-connector and Fysetc 7-inch Duepanel touch-LCD"

Het bericht CNC workbee control cabinet free OBJ and STL downloads with space for DUET3 6HC, power supply, panic button, 24-pin multi-connector and Fysetc 7-inch Duepanel touch-LCD verscheen eerst op Jantec.nl.

]]> Indymill CNC Controller -tests and the final choice- and WHY https://jantecnl.synology.me/en/indymill-cnc-controller/ Wed, 25 May 2022 18:53:54 +0000 https://jangriffioen.com/?p=3888 To get the best possible CNC driver / firmware setup, in combination with the CAD and CAM programs that are required, I tested the following setups with the Indymill hardware: I have a setup running on the CMC Indymill with Duet wifi BUT I just can’t get enough current to my Nema23 stepper motors. Therefore, …

Continue reading "Indymill CNC Controller -tests and the final choice- and WHY"

Het bericht Indymill CNC Controller -tests and the final choice- and WHY verscheen eerst op Jantec.nl.

]]> OpenCNC hardware driver board with 2x Arduino Mega mini controller and wifi controller box https://jantecnl.synology.me/en/opencnc-hardware-driver-board-with-2x-arduino-mega-mini/ Sun, 14 Nov 2021 13:50:28 +0000 https://jantecnl.synology.me/?p=9045 This is the link to the board, user manual et cetera by Timo Altholtmann. I bought 2 kits with all hardware for 2 driver boards and 2 wifi remote control units from Timo in November 2021. Will update here how this progresses, as I intend to use this on either one of my 2 CNC …

Continue reading "OpenCNC hardware driver board with 2x Arduino Mega mini controller and wifi controller box"

Het bericht OpenCNC hardware driver board with 2x Arduino Mega mini controller and wifi controller box verscheen eerst op Jantec.nl.

]]> Minimill CNC conversion WMD16LV Z-axis adapter for NEMA23 direct drive https://jantecnl.synology.me/en/minimill-cnc-conversion-wmd16lv-z-axis-adapter-plate-for-nema23-direct-drive/ Sun, 07 Nov 2021 20:40:02 +0000 https://jantecnl.synology.me/?p=8893 While I was making my CNC adapter plates with teethed wheels and belts, I discovered that not much exists that is ready to use for these conversions. DOWNLOAD: MINIMILL_BF16L CNC_Z_adapter direct drive 2022_07_25_V1_5-jantec.nl I am therefore also making direct drive adapter parts, to try this out. This is the third piece I make for direct …

Continue reading "Minimill CNC conversion WMD16LV Z-axis adapter for NEMA23 direct drive"

Het bericht Minimill CNC conversion WMD16LV Z-axis adapter for NEMA23 direct drive verscheen eerst op Jantec.nl.

]]> Minimill CNC conversion WMD16LV X-axis adapter for NEMA23 direct drive https://jantecnl.synology.me/en/minimill-cnc-conversion-wmd16lv-x-axis-adapter-plate-for-nema23-direct-drive/ Sun, 07 Nov 2021 20:32:51 +0000 https://jantecnl.synology.me/?p=8881 While I was making my CNC adapter plates with teethed wheels and belts, I discovered that not much exists that is ready to use for these conversions. DOWNLOAD: MINIMILL_BF16L CNC_X_adapter direct drive 2022_07_25_V1_5-jantec.nl I am therefore also making direct drive adapter parts, to try this out.   This is the second piece I make for …

Continue reading "Minimill CNC conversion WMD16LV X-axis adapter for NEMA23 direct drive"

Het bericht Minimill CNC conversion WMD16LV X-axis adapter for NEMA23 direct drive verscheen eerst op Jantec.nl.

]]> Minimill CNC conversion WMD16LV Y-axis adapter for NEMA23 direct drive https://jantecnl.synology.me/en/minimill-cnc-conversion-wmd16lv-y-axis-adapter-for-nema23-direct-drive/ Fri, 05 Nov 2021 22:41:48 +0000 https://jantecnl.synology.me/?p=8796 While I was making my CNC adapter plates with teethed wheels and belts, I discovered that not much exists that is ready to use for these conversions. DOWNLOAD: MINIMILL_BF16L CNC_Y_adapter direct 2022_07_25_V1_5-jantec.nl I am therefore also making direct drive adapter parts, to try this out. This is the first one, starting with the most difficult …

Continue reading "Minimill CNC conversion WMD16LV Y-axis adapter for NEMA23 direct drive"

Het bericht Minimill CNC conversion WMD16LV Y-axis adapter for NEMA23 direct drive verscheen eerst op Jantec.nl.

]]> CNC conversion of my Toolmania WBM16LV (TM BF 16) mill with NEMA23 steppers, 3dprinted adapters, teethed wheels and teethed belts https://jantecnl.synology.me/en/cnc-conversion-of-my-toolmania-wbm16lv-mill-with-nema23-steppers-3d-printed-adapters-teethed-wheels-and-teethed-belts-tm-bf-16/ Sun, 31 Oct 2021 17:17:50 +0000 https://jantecnl.synology.me/?p=8814 Before My Toolmania WBM16LV milling machine was delivered I already had plans to convert it to a CNC milling machine. I do have some experience with 3d printing, and I have 2 CNC routers up and running, like the Indymill.  So, the conversion of this mill will not be difficult in the Technical sense.  But- …

Continue reading "CNC conversion of my Toolmania WBM16LV (TM BF 16) mill with NEMA23 steppers, 3dprinted adapters, teethed wheels and teethed belts"

Het bericht CNC conversion of my Toolmania WBM16LV (TM BF 16) mill with NEMA23 steppers, 3dprinted adapters, teethed wheels and teethed belts verscheen eerst op Jantec.nl.

]]> Minimill CNC conversion Toolmania WMD16LV endstops https://jantecnl.synology.me/en/minimill-cnc-conversion-toolmania-wmd16lv-endstops/ Sat, 30 Oct 2021 14:53:59 +0000 https://jantecnl.synology.me/?p=8727 2021-10-30:  When converting (or upgrading, depends on your P.O.V.) a mill to CNC, it is absolutely necessary to have end stops on all ends. Except the low-end of the Z-axis, an end stop at the Z-axis low end is practically impossible. On the Z-axis low end another solution has been established by using a Z-stop …

Continue reading "Minimill CNC conversion Toolmania WMD16LV endstops"

Het bericht Minimill CNC conversion Toolmania WMD16LV endstops verscheen eerst op Jantec.nl.

]]> Minimill CNC conversion WMD16LV Z-axis adapter for NEMA23 and M3 teethed belt https://jantecnl.synology.me/en/minimill-cnc-conversion-wmd16lv-z-axis-adapter-for-nema23-and-m3-teethed-belt/ Thu, 28 Oct 2021 20:07:09 +0000 https://jantecnl.synology.me/?p=8649 New stronger version V2 made, also including a top cover 2025,04-24. Will update with pictures after install on the minimill. MINIMILL_BF16L CNC_Z_adapter belt driven 2025_05_24_V2 Jantec.nl Please donate $1 to my paypal account if you use (parts of) my developed materials so I can continue to share nice stuff for you to download : The mount …

Continue reading "Minimill CNC conversion WMD16LV Z-axis adapter for NEMA23 and M3 teethed belt"

Het bericht Minimill CNC conversion WMD16LV Z-axis adapter for NEMA23 and M3 teethed belt verscheen eerst op Jantec.nl.

]]> Minimill CNC conversion WMD16LV X-axis adapter for NEMA23 and M3 teethed belt https://jantecnl.synology.me/en/minimill-cnc-conversion-wmd16lv-x-axis-adapter-for-nema23-and-m3-teethed-belt/ Wed, 27 Oct 2021 10:50:57 +0000 https://jantecnl.synology.me/?p=8623 NEW VERSION with debree screen: For this setup you need 1 piece Nema23 56 length stepper motor with 6.35 mm axis 1  piece 12-teethed M3 wheel with collar, hole dia 6.35 mm, 11 mm width 1  piece 24-teethed M3 wheel with NO collar, hole dia 10 mm, 11 mm width Teethed M3 belt , 9 …

Continue reading "Minimill CNC conversion WMD16LV X-axis adapter for NEMA23 and M3 teethed belt"

Het bericht Minimill CNC conversion WMD16LV X-axis adapter for NEMA23 and M3 teethed belt verscheen eerst op Jantec.nl.

]]> Minimill CNC conversion WMD16LV Y-axis 3d printed adapter for NEMA23 and M3 teethed belt https://jantecnl.synology.me/en/minimill-cnc-conversion-wmd16lv-y-axis-3d-printed-adapter-for-nema23-and-m3-teethed-belt/ Tue, 26 Oct 2021 01:36:12 +0000 https://jantecnl.synology.me/?p=8597 This is my conversion from standard Minimill BG16 Chinese version to fullly CNC machine with sturdy 3d printed parts in ABS or carbon PETG

Het bericht Minimill CNC conversion WMD16LV Y-axis 3d printed adapter for NEMA23 and M3 teethed belt verscheen eerst op Jantec.nl.

]]> MACH-3 integrated driver board USB-CNC-MDK2 https://jantecnl.synology.me/en/mach-3-integrated-driver-board-usb-cnc-mdk2/ Wed, 20 Oct 2021 20:10:38 +0000 https://jantecnl.synology.me/?p=8546 My main supplier of parts is Aliexpress, and I also buy a lot from Banggood. At Aliexpress, I recently discovered a board that will interact with Mach3 and has onboard drivers for larger stepper motors like Nema23. This board takes 24 Volts,  has a USB connection to the PC, an SD card slot and 2 …

Continue reading "MACH-3 integrated driver board USB-CNC-MDK2"

Het bericht MACH-3 integrated driver board USB-CNC-MDK2 verscheen eerst op Jantec.nl.

]]> Toolmania WBM16LV Mill with X-Y-Z1 en Z2 reading https://jantecnl.synology.me/en/toolmania-wbm-16lv-mill-with-x-y-z1-en-z2-reading/ Sun, 10 Oct 2021 13:09:21 +0000 https://jantecnl.synology.me/?p=8697 GO TO MY CNC CONVERSION PAGE So, after a long search I finally replaced my very old column drill for a small model column mill from Toolmania.  I had the last one still available from this series. It is a model WBM-16LV with an indirect belt-driven spindle with a 750 watt vario motor.  Even at …

Continue reading "Toolmania WBM16LV Mill with X-Y-Z1 en Z2 reading"

Het bericht Toolmania WBM16LV Mill with X-Y-Z1 en Z2 reading verscheen eerst op Jantec.nl.

]]> Cabling the Indymill CNC https://jantecnl.synology.me/en/cabling-the-indymill-cnc/ Thu, 15 Jul 2021 15:40:33 +0000 https://jangriffioen.com/?p=4150 Het bericht Cabling the Indymill CNC verscheen eerst op Jantec.nl.

]]> Indymill CNC with GRBL Mega256 RAMPS1.4 shield and LCD https://jantecnl.synology.me/en/indymill-cnc-with-grbl-mega256-ramps1-4-shield-and-lcd/ Wed, 07 Jul 2021 08:41:41 +0000 https://jangriffioen.com/?p=4125 This is my test setup for a 1.4 RAMPS shield on top of an Arduino Mega with TMC2209 drivers, optical endstops and individually homing of dual Yaxes PLUS an LCD that shows the exact XYZ locations anytime. Firstly, I must admit that this option was initially NOT on my list bacause I felt this was …

Continue reading "Indymill CNC with GRBL Mega256 RAMPS1.4 shield and LCD"

Het bericht Indymill CNC with GRBL Mega256 RAMPS1.4 shield and LCD verscheen eerst op Jantec.nl.

]]> Indymill CNC Nema23 with sensorless homing on Mellow Fly-CDY2 https://jantecnl.synology.me/en/indymill-cnc-nema23-with-sensorless-homin-on-mellow-fly-cdy2g/ Wed, 07 Jul 2021 07:35:24 +0000 https://jangriffioen.com/?p=4098 After configuring the reprap Mellow FLY-CDY-V2 motherboard for CNC including the webinterface and installing Mellow’s TMC2209 driver units I got  sensorless homing setup for the Indymill. It took a lot of time to get it all tuned, as the 3 axes act entirely different due to their different inertia.  The weight that is carried is …

Continue reading "Indymill CNC Nema23 with sensorless homing on Mellow Fly-CDY2"

Het bericht Indymill CNC Nema23 with sensorless homing on Mellow Fly-CDY2 verscheen eerst op Jantec.nl.

]]> Reprap CNC with Mellow FLY-CDY-V2 – Duet2wifi clone https://jantecnl.synology.me/en/reprap-cnc-with-mellow-fly-cdy-v2-duet2wifi-clone/ Wed, 07 Jul 2021 06:46:47 +0000 https://jangriffioen.com/?p=4087 To get the Indymill running, at first I chose to use the Duet2wifi and reprap3 as base.  Since I am very familiar with Reprap and with the Duet, I want to try this anyway.  In the end, if it is all installed I need to have software to design and get a file with Gcode …

Continue reading "Reprap CNC with Mellow FLY-CDY-V2 – Duet2wifi clone"

Het bericht Reprap CNC with Mellow FLY-CDY-V2 – Duet2wifi clone verscheen eerst op Jantec.nl.

]]> CNC pendant for Duet2wifi and Indymill https://jantecnl.synology.me/en/cnc-pendant-for-duet2wifi-and-indymill/ Fri, 02 Jul 2021 20:24:21 +0000 https://jangriffioen.com/?p=4058 On the Duet support site a very good description and software for rebuilding a Chinese CNC-pendant for the Duet2wifi is available. I used this description to program an arduino pro micro, and connect it to the pendant wired, place it inside the pendant and connected the pendant with 4 wires to the Duet.  This works …

Continue reading "CNC pendant for Duet2wifi and Indymill"

Het bericht CNC pendant for Duet2wifi and Indymill verscheen eerst op Jantec.nl.

]]> Flightcase for the Indymill’s electronics https://jantecnl.synology.me/en/flightcase-for-the-indymills-electronics/ Sat, 26 Jun 2021 17:52:17 +0000 https://jangriffioen.com/?p=4037 Just ordered me a new case for the Indymill’s electronics from Thomann.de. The idea is to get everything mounted in the cases, and use the control case with the lid open.  The control case gets connected to the Indymill case with multicables and – connectors. When not used, the cables get disconnected from the Indymill …

Continue reading "Flightcase for the Indymill’s electronics"

Het bericht Flightcase for the Indymill’s electronics verscheen eerst op Jantec.nl.

]]> Flightcase for the Indymill https://jantecnl.synology.me/en/flightcase-for-the-indymill/ Sat, 26 Jun 2021 17:30:27 +0000 https://jangriffioen.com/?p=4031 This is only the lower part of the newly built flightcase for the Indymill.  It is 15cm high, 75 cm deep and 80 cm wide, all measured on the inside. The top of the case is 22 cm high on the inside and it will get perspex windows at the front and top.  Wheels will …

Continue reading "Flightcase for the Indymill"

Het bericht Flightcase for the Indymill verscheen eerst op Jantec.nl.

]]> My mini shop https://jantecnl.synology.me/en/my-mini-shop/ Sun, 30 May 2021 14:05:56 +0000 https://jangriffioen.com/?p=3979 Het bericht My mini shop verscheen eerst op Jantec.nl.

]]> Indymill Z-axis with adapted lead screw bearing https://jantecnl.synology.me/en/indymill-z-axis-with-adapted-lead-screw-bearing/ Tue, 25 May 2021 18:40:07 +0000 https://jangriffioen.com/?p=3876 The Indymill’s Z-axis uses a lead screw  by design , and not a ballscrew as I would like.  But- that will be changed later. For now, the lead screw solution will be OK because I will first build the Indymill machine and use the 500 Watt DC engine I already have for my CNC3018 setup. …

Continue reading "Indymill Z-axis with adapted lead screw bearing"

Het bericht Indymill Z-axis with adapted lead screw bearing verscheen eerst op Jantec.nl.

]]> Indymill adapted X-axis for more rigidity https://jantecnl.synology.me/en/indymill-adapted-x-axis-for-more-rigidity/ Sun, 23 May 2021 20:39:38 +0000 https://jangriffioen.com/?p=3856 2021-05-22 Under construction-still trying to find out how to do this. I intend to use the same method as with the Y-axes so drop the 3d printed parts as much as possible and re-use the available bearing blocks and nut holder. For the red nut holder I only need to make a flat extension plate …

Continue reading "Indymill adapted X-axis for more rigidity"

Het bericht Indymill adapted X-axis for more rigidity verscheen eerst op Jantec.nl.

]]> Indymill adapted frame and -Y-axes build instructions https://jantecnl.synology.me/en/indymill-adapted-frame-and-y-axes-build-instructions/ Sun, 23 May 2021 14:40:12 +0000 https://jangriffioen.com/?p=3839 In this post, you can see how I changed the original Indymill to more rigidity by using the original 1605 aluminium nut holders for the 1605 ball bearing screws of the Y axis, and how I made use of the BK12 and BF12 ball bearing blocks instead of the 3d printed parts like in the …

Continue reading "Indymill adapted frame and -Y-axes build instructions"

Het bericht Indymill adapted frame and -Y-axes build instructions verscheen eerst op Jantec.nl.

]]> Milling the Indymill parts https://jantecnl.synology.me/en/milling-the-indymill-parts/ Sun, 23 May 2021 11:54:31 +0000 https://jangriffioen.com/?p=3827 Het bericht Milling the Indymill parts verscheen eerst op Jantec.nl.

]]> Indymill iron hardware treatment https://jantecnl.synology.me/en/indymill-iron-hardware-treatment/ Fri, 21 May 2021 14:10:55 +0000 https://jangriffioen.com/?p=3820 The required iron plates were not available in ready- to use state at the time I needed this, fortunately I could buy the plates as a kit with all of the drilled holes already in it, non-painted.  And- all of the thread tapping still needed to be done.   Since I am also making changes to …

Continue reading "Indymill iron hardware treatment"

Het bericht Indymill iron hardware treatment verscheen eerst op Jantec.nl.

]]> Plasma cutter router DIY ‘the simple way’ https://jantecnl.synology.me/en/plasma-cutter-x-y-table-diy-the-simple-way/ Sat, 15 May 2021 09:05:59 +0000 https://jangriffioen.com/?p=3788 I am in the process of developing a router for my plasma cutter, since the cutter works very good but it will be way more effective once I can machine my designs with a router for this cutter. My design differs from others because i will use only existing affordable parts that require no additional …

Continue reading "Plasma cutter router DIY ‘the simple way’"

Het bericht Plasma cutter router DIY ‘the simple way’ verscheen eerst op Jantec.nl.

]]> IndyMill CNC: GT2560 GRBL 5-axis controller https://jantecnl.synology.me/en/gt2560-grbl-5-axis-controller/ Tue, 04 May 2021 03:46:04 +0000 https://jangriffioen.com/?p=3125 In my search for the best affordable CNC motherboard for my new to build Indymill CNC machine  I finally chose the GT2560 from Geeetech as best compromise.  At least for now, and maybe later I may change to an RRF3 board with a good remote CNC interface like the Mellow Fly-CDY-V2. The board has a …

Continue reading "IndyMill CNC: GT2560 GRBL 5-axis controller"

Het bericht IndyMill CNC: GT2560 GRBL 5-axis controller verscheen eerst op Jantec.nl.

]]> IndyMill CNC machine https://jantecnl.synology.me/en/indymill-cnc-machine/ Sun, 02 May 2021 18:39:36 +0000 https://jangriffioen.com/?p=3102 Since Corona was still around (May, 2021) , I had some time available to spend on other things than just work. I already had an upgraded 3018 CNC-machine with a 0.5 kW spindle motor, and a simple GRBL 3- axis board that works very well.  But- it would be nice to make a CNC machine …

Continue reading "IndyMill CNC machine"

Het bericht IndyMill CNC machine verscheen eerst op Jantec.nl.

]]> K40 lasercutter https://jantecnl.synology.me/en/k40-lasercutter/ Sat, 27 Jun 2020 09:44:57 +0000 https://jantecnl.synology.me/?p=2386 My Chinese lasercutter which I bought back in 2014 has been upgraded over the years.  As many others do, I got the cooling system for the laser tube inside the casing, added some LED lights inside and also added an air pump for the laser head. All in all the machine works fine now but …

Continue reading "K40 lasercutter"

Het bericht K40 lasercutter verscheen eerst op Jantec.nl.

]]>