GRATIS STL-DOWNLOADS verloopstukken, bochten, verzetstukken, montagebeugel en wanddoorvoeren voor 55×110 mm luchtkanaalbuis
10mm wall plate for 55x110mm air duct. The wall plates are glued in place in the wall and are also used for covering the sides of the through-hole in the wall. The 55×110 air duct will then pass through the glued-in wall plates on either side of the wall.
40mm wall plate for 55x110mm air duct.wall_plate, extended to 60mm for 55x110mm air duct. This piece connects through the wall and fits in one of the above wall plate-pieceswall plate with short 90 degrees angled bend. Both sides connect to a 55x110mm air duct
90 degrees bend for 55x110mm air duct90 degrees bend for 110x55mm air ductpipe connector piece with 15mm offset, both sides connect to a 55x110mm air ductslim mounting bracket for 55x110mm air ducts
transition piece from round 150mm air filter box output to 55x110mm air duct, wall_mountedendcap for 55x110mm air duct
